DEVCON CORP -- FLEXANE RESIN  -- 8030-00N000373
<pre>=====================  Product Identification  =====================

Product ID:FLEXANE RESIN
MSDS Date:01/01/1985
FSC:8030
NIIN:00N000373
=== Responsible Party ===
Company Name:DEVCON CORP
Emergency Phone Num:617-777-1100
CAGE:16059
=== Contractor Identification ===
Company Name:DEVCON CORP
Address:30 ENDICOTT ST
Box:City:DANVERS
State:MA
ZIP:01923-3753
Country:US
Phone:1-508-777-1100
CAGE:16059

=============  Composition/Information on Ingredients  =============

Ingred Name:METHYLENE BISPHENYL ISOCYANATE (MDI)  (SARA III)
CAS:101-68-8
RTECS #:NQ9350000
Fraction by Wt: 100%
OSHA PEL:C, 0.02 PPM
ACGIH TLV:0.005 PPM; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

Effects of Overexposure:SKIN/EYE IRRIT, POSS SKIN SENSIT.

=======================  First Aid Measures  =======================

First Aid:WASH W/SOAP & WATER. FLUSH EYES W/WATER AT LEAST 15 MIN.

=====================  Fire Fighting Measures  =====================

Flash Point:>250F TCC
Extinguishing Media:CO*2, DRY CHEM
Fire Fighting Procedures:AVOID BRTHNG SMOKE

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB W/SWEEPING CMPD. DISCARD IN VENTED
    CNTNRS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:IF SKIN CNTCT OCCURS, WASH W/SOAP &
    WATER. STORE IN COOL DRY LOCATION. AVOID BRTHNG VAPORS.

=============  Exposure Controls/Personal Protection  =============

Ventilation:MFR REC LOCAL EXHST
Protective Gloves:RUBBER
Eye Protection:GOGGLES
Supplemental Safety and Health
VAP DNSTY >1.0. PART A OF 2-PART KIT.

==================  Physical/Chemical Properties  ==================

Spec Gravity:1.0400
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR, WATER-WHITE LIQ, CHARACTERISTIC ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
MOISTURE, STRONG OXIDIZERS, ALCOHOLS, AMINES
Stability Condition to Avoid:EXPOSURE TO HIGH HUMIDITY MAY CAUSE RESIN
    CURING

====================  Disposal Considerations  ====================

Waste Disposal Methods:FOLLOW FED, STATE, LOCAL CODES

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.